[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart, PORTABLE CART WARNING stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] The volume at each frequency can be adjusted from –6dB to 0dB to +6dB in 1 dB steps. – THX Ultra2/Select2 Subwoofer No Yes If you’re using a THX-certified subwoofer, set this setting to “Yes”. Note • If the “Subwoofer” setting is set to “No”, this setting cannot be selected (➔ page 60). 3 Use q to select “Channel”, and then use e/r to select another speaker. You cannot select speakers that you set to “No” or “None” in the “Speaker Configuration” (➔ page 59). Note • When the Direct or Pure Audio (European, Australian, and Asian models) listening mode is selected, the equalizer settings have no effect. • If “Audyssey” is enabled , it prevails over this setting (➔ page 64). – BGC Off On If your listening room layout (for practical or aesthetic reasons) locates most of the listeners close to the rear wall, the resulting bass level can be sufficiently reinforced by the boundary that the overall sound becomes “boomy”. € If the “Subwoofer” setting is set to “No”, this setting cannot be selected (➔ page 60). Operating procedure (➔ page 56) En-61 Advanced Operations ■ Loudness Plus Off On When the “Loudness Plus” setting is set to “On”, it is possible to enjoy even subtle nuances of audio expression at low volume. – Preserve THX Settings Yes No If this setting is set to “Yes”, Dynamic EQ and Dynamic Volume have no effect in THX listening mode. Audio Adjust With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. dolby ■ PL IIx Music (2ch Input) These settings apply to only 2-channel stereo sources. If you’re not using any surround back speakers, these settings apply to Dolby Pro Logic II, not Dolby Pro Logic IIx. Panorama On Off With this setting, you can broaden the width of the front stereo image when using the Dolby Pro Logic IIx Music listening mode. Dimension –3 to 0 to +3 With this setting, you can move the sound field forward or backward when using the Dolby Pro Logic IIx Music listening mode. If the stereo image feels too wide, or there’s too much surround sound, move the sound field forward to improve the balance. Conversely, if the stereo image feels like it’s in mono, or there’s not enough surround sound, move it backward. Center Width 0 to 3 to 7 With this setting, you can adjust the width of the sound from the center speaker when using the Dolby Pro Logic IIx Music listening mode. Normally, if you’re using a center speaker, the center channel sound is output from only the center speaker. (If you’re not using a center speaker, the center channel sound will be distributed to the front left and right speakers to create a phantom center. ) This setting controls the front left, right, and center mix, allowing you to adjust the weight of the center channel sound. [. . . ] Profile: You can play tracks from “Recently Listened Tracks”, “Library” and “Neighbours”. 3 Use q/w to select a station , and press ENTER or 1 to start playback. Enabled buttons: 1, 2, 6 ■ Menu Items I Love this track: Track information is saved in Last. Personal Station: You can play tracks from personalized station (“Your Library”, “Your Neighbourhood” and “Your Recommendations”). [. . . ]